Spray Dryer

Last update 2018-03-23


9.png

Application

It is widely used in chemical, food, pharmaceutical and ceramics industry. The dryer can equip with gas burner which applies CNG as fuel to give much clean environment.

Brief introduction

MKSD series spray dryer is an apparatus that can finish drying and granulating at the same time. After filtering and heating, the air get into the dispenser at the top of the dryer, then evenly get into the drying chamber spirally. The feeding material pass through the high speed centrifugal atomizer or high pressure atomizer at the top of the dryer, change into very fine mist droplet, and exposed to the hot air, dried to the final product in a short time. The final product is sent out from the bottom of the drying tower and cyclone continuously, the dust is collected by the pulse bag collector, exhaust is vented by the fan. The ball granule with certain size and ratio can be got in accordance with requirements of process by adjusting the pressure & flowrate of the pump and the size of atomizing hole.

Main technical specification

型号Model
MKSD-50MKSD-100MKSD-150MKSD-200MKSD-300MKSD-500MKSD-1000
干燥能力Evaporation capacity(kg/h)
50
100
150
200
300
500
1000
外形尺寸Outline dimension(mm)
1200*8900
1800*11500
2200*13500
2400*14800
2800*15400
3400*18800
4600*22500
功率Power(kw)
8.5
14
22
24
30
45
75
进气温度Air input temp.(℃)
150~350
产品水分Product moisture content(%)
<6
物料完整率Material recovery
>97

Site photo

LiveZilla Live Chat Software
LiveZilla Live Chat Software